pillows

Materials and Tools

• Feather pillow insert, 10 x 18" (25 x 45cm)
• For the pillow cover: 23 1/2 x 19" (57 x 47cm) orange felt or felted woven-wool fabric
• For the folded rosettes: 20 x 18" (50 x 45cm) orange felt or felted woven-wool fabric
• Matching zipper, 18" (45cm) long — optional
• Matching sewing thread
• Basic sewing kit
• Sewing machine

1. If you wish to make a pillow back with a zipper, cut out three pieces of felt for the pillow cover — one piece measuring 11 x 19" (27 x 47cm) for the front and two pieces measuring 6 x 19" (14.5 x 47cm) and 6 1/2 x 19" (15.5 x 47cm) for the back. If you wish to make a sewn-in pillow back, cut the back panel to the same measurements as the front. To make the rosettes, cut out 60 felt circles with a 3" (7cm) diameter.

2. Pinch each felt circle in the middle, and fold the sides in to form a rosette. Hand-stitch the base of each folded rosette to hold it together.

3. Starting at one end of the front pillow panel, hand-stitch the rosettes onto the fabric, stitching neatly and securely through the base of each one.

4. Continue adding rosettes, positioning them very close together to form a dense, wide row of rosettes through the center of the pillow panel. Make sure that the row of rosettes is straight and that there is the same amount of undecorated base fabric on either side of the row.

5. Make up the pillow back and join the front and back following one of the two options below. Insert the pillow form into the finished cover.

Sewn-In Pillow Back

This is a really easy and quick way to apply a pillow backing, and it requires only a small amount of hand-sewing. The back panel of the pillow is cut in one piece, to the same size as the front panel. The front and back panels are pinned together, with right sides facing, then machine-sewn along three sides using a 1/2" (1cm) seam allowance. Once the cover has been turned right side out and the pillow form inserted, the seam is turned in along the fourth side and closed with invisible stitching. The drawback to this method is that, once sewn in, the pillow cover cannot be easily removed for washing, and would require picking out the seam and resewing.

1. Cut a piece of fabric for the back of the pillow cover to the same size as the front panel, including the same 1/2" (1cm) seam allowance (or as specified). Place the two panels with right sides together, and pin along the seam allowance on three sides, leaving the fourth side open.

2. Using matching thread and a small to medium sized straight stitch, machine-sew along the three sides to join the front and back panels together, removing the pins as you sew. Cut off the corners on the diagonal, being careful not to cut through the stitching — this will produce neater corners on the finished pillow.

3. Turn the pillow cover right side out and insert the pillow form. To close the fourth side of the cover, fold the 1/2" (1cm) seam allowance to the inside and pin the edges together.

4. Stitch the two sides together, keeping the stitches as invisible as possible. To do this, work from right to left if you are right-handed and from left to right (as shown) if you are left-handed. Knot the end of the thread, and bring the needle and thread out through one folded edge. Slip the needle through the fold of the opposite edge for about 1/4" (5mm); bring the needle out and draw the thread through. Continue to slip the needle and thread through the opposing folded edges.

Pillow Back With Zipper

Although sewing in a zipper requires a degree of technical skill, this is still not a complicated way to make up the back of a pillow cover, and it is the method that I would recommend using, as it does mean that the cover can be easily removed for cleaning. The back panel of the pillow cover is cut in two pieces, which are joined together in the middle by the zipper, running horizontally. You will need a metal or nylon closed-end zipper in a color that matches your pillow cover. The zipper should be the same length as the pillow form.

1. Cut two pieces of fabric for the back cover. Both should be the same width as the front cover (adding a 1/2" [1cm] side-seam allowance, or as specified); one should be 1 1/2" (3cm) longer than half the length of the front cover, and the other should be 1" (2cm) longer, giving a 1/2" (1cm) seam allowance along the top and bottom edges, and a 1" (2cm) and 1/2" (1cm) seam allowance along the inner zip edges respectively. With the fabric wrong side up, fold in 1" (2cm) along the inner edge of the larger back piece, and press.

2. With the zipper wrong side up, pin one side of the zipper tape along the cut edge of the fold, with 1/2" (1cm) clear at each end for the side seams. Open the zipper. Using the zipper foot, machine-sew the tape in place along the folded edge.

3. Pin the other side of the zipper tape along the inner edge of the other back piece, with the fabric right side up. Machine-sew in place.

4. Fold the edge over to form a neat fold aligning with the zipper's teeth. Machine-sew in place.

5. With the zipper half open, pin the front and back covers with right sides together. Using a 1/2" (1cm) seam allowance, machine-sew around the edges. Cut the corners (shown in step 2 opposite); turn right side out, and insert the pillow form.